3M Resin Kit 91-NBA 0 up to 91-NBA 7
Inline Joint Kit Series with Resin 470W
3M Scotchcast™ resin joint kits 91-NBA x are designed to be used for 1-core up to 5-core non shielded polymeric low voltage energy cables. The application incorporates electrical insulation and mechanical protection of joints with compression or mechanical connectors. They can be used for indoor and outdoor, underground and submerged applications.
• Resin 470W in transparent two chamber bags with integrated Closed Mixing and Pouring (CMP) system.
• One part translucent Mould Body with Snap Fit closing system for quick and easy handling.
• Pre cut foam sealing elements to provide reliable sealing to the Mould Body without tooling for all cable application diameters.
• Closure cap to prevent any pollution.
• Translucent mould body with closure cap
• Scotchcast™ 470W resin bag with CMP
• Pre-cut sealing elements
• Abrasive strip
• Detailed instruction
3MTM ScotchcastTM resin inline joint kit will be delivered with a one part translucent mould body for simple and easy handling. Distances inside the body can be checked easily.
All necessary dimensions, like application range, cable preparation are given in the detailed instruction.
The two foam sealing elements can be adapted to the required cable diameter by removing the pre-cut adapter rings.
The resin 470W is delivered in two chamber bag with integrated spout and aluminium Guard Bag for protection against humidity.
The re-openable seam and integrated spout with a membrane provides a Closed, Mixing and Pouring system.
After the seam of the two chamber bag is opened, the resin components can be mixed. To pour the resin into the mould body, the spout is connected with the dome by turning 180°. While turning, the membrane is cut open to pour the resin.
The Closed Mixing and Pouring System provides resin handling without any skin contact.
For protection against pollution, a closure cap is applied onto the dome.
After curing, the remaining resin in the bag can be disposed as house waste.
The full ScotchcastTM Resin Kit Series 91-NBA 0 up to 91-NBA 7 were tested according EN50393 Table 3 / I / A1
Type of Test according to EN50393 Table 3 / I / A1
AC Voltage Withstand Test in air 4kV AC/ 1 min
Insulation Resistance Test in air 1kV DC
Heat Cycle in air 63 cycles: 5h/3h
Heat Cycle in water 63 cycles: 5h/3h
AC Voltage Withstand Test in water 4kV AC/ 1 min
Insulation Resistance Test in water 1kV DC
Page 2 of 3
3M™ ScotchcastTM Resin 470W has a shelf life of at least 36 months when stored between 15 °C and 35 °C with a humidity level < 75 % in the originally sealed bag.
The expiration date of each product appears on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, it is the responsibility of the user to determine applicability of the resin.
Safety and Handling
3M provides its customers with a product specific Material Safety Data Sheet (MSDS) to cover potential health effects, safe handling, storage, use and disposal information. 3M strongly encourages its customers to review the MSDS on its products prior to their use.
3M has a fundamental concern for all who make, distribute and use its products, and for the environment in which we live. This concern is the basis of our philosophy and policies by which we assess the health and environmental information on our products and then take the appropriate steps to protect employee, the public health and the environment.
3M encourages its customers and potential users of 3M products to review their applications for such products from the standpoint of human health and environmental quality. To help ensure that 3M products are not used in ways for which they were not intended or tested. 3M personnel are available to assist customers in dealing with ecological and product safety considerations. Your 3M sales representative can arrange for the proper contacts.
The 470W Resin is in compliance with all European directives and regulations, relevant for this product; EU directive 2002/95/EC (RoHS) and EU regulation 1907/2007/EC (REACH)